Specifications

8
D
escription
1
PC Board
Designation
Catalog No.
ID5601
Catalog No.
ID5602
Catalog No.
ID5203
Catalog No.
ID5403
Catalog No.
ID5405
AC Line Input Voltage (115, 230) J1
3 3
— — —
M
otor Horsepower (see Table 4 - Electrical Ratings, on page 10)
J
2
3 3 3 3 3
Automatic Ride-Through or Manual Restart (A*,M) J3
3 3 3 3 3
Frequency Multiplier (1X, 2X) J4
3 3 3 3 3
M
otor Frequency (50Hz,
6
0Hz
) J
5
3 3 3 3 3
Fixed or Adjustable Boost (FIX, ADJ) J6
3 3 3 3 3
Regenerative or DC Injection Braking (RG, INJ) J7
3 3 3 3 3
“
Run” or “Fault” Output Relay Operation (
R,
F)
J
8
3 3 3 3 3
Normally Open or Closed Stop Contact (NO, NC) J9
3 3 3 3 3
Constant or Variable Torque (VT, CT) J10
3 3 3 3 3
I
2
t Overload Selection (1,2)
J11
3 3 3 3 3
TABLE 1 – JUMPER SELECTABLE FEATURES
TABLE 2 – OPTIONAL ACCESSORIES
Notes: 1. Bold indicates factory setting. 2. In Automatic Ride-Through Mode, the drive will automatically restart due to a momentary power loss of less
than 2 seconds.
Description
Catalog No.
ID5601
Catalog No.
ID5602
Catalog No.
ID5203
Catalog No.
ID5403
Catalog No.
ID5405
Forward-Stop-Reverse Switch – Provides motor reversing and stop
functions.Mounts on the enclosure cover and is sup\plied with a switch
seal to maintain liquidtight integrity.
ID5FRS-1 ID5FRS-1 ID5FRS-1 ID5FRS-1 ID5FRS-1
Signal Isolator – Provides isolation between a non-isolated signal
voltage source and the drive. Mounts on the drive’s PC board with four
snap-ins.
ID5SI-2* ID5SI-2* ID5SI-2* ID5SI-2* ID5SI-2*
Auto/Manual Switch – When used with the Signal Isolator, it selects
remote process signal or the Main Speed Potentiometer. Mounts on the
enclosure cover and is supplied with a switch seal to maintain liq-
uidtight integrity.
ID5AMS-1 ID5AMS-1 ID5AMS-1 ID5AMS-1 ID5AMS-1
* Warning! It is highly recommended that the ID5SI-2 Signal Isolator be installed when using the drive with
external control signals.
Notes: Complies with CE Council Directive 39/336/EEC Industrial Standard.