Specifications

Section 2
General Information
MN715P General Information 2-1
Year 2000 Compliance
The motor control products listed below are manufactured or offered for sale
by Baldor Electric and are certified to be year 2000 compliant.
DC Motor Controls: Series BC100/200, BC19H, BC20H, TSD, UM, UMH.
AC Motor Controls: Series ID10, ID1100, ID15H, ID15J, ID15P, ID15V,
ZD17H, ZD18H, ID21H, ZD22H, SD23H, ZD24M, ZD25M, SD26M, BSC,
DBSC, BTS, SBTS, FLEX, FLEX+, MINTDRIVE.
Position Controllers: PMC, SmartMove, NextMove.
Furthermore, year 2000 compliance means that the product will:
Not use dates or perform any date processing.
Date information is irrelevant to proper operation; and
There are no problems or issues to address to ensure continued and
proper operation of the product listed due to changes in century dates.
CE Compliance
A custom unit may be required, contact Baldor. Compliance to Directive
89/336/EEC is the responsibility of the system integrator. A control, motor
and all system components must have proper shielding grounding and
filtering as described in MN1383. Please refer to this manual for installation
techniques for CE compliance.
Limited Warranty
For a period of two (2) years from the date of original purchase, BALDOR will
repair or replace without charge controls and accessories which our
examination proves to be defective in material or workmanship. This warranty
is valid if the unit has not been tampered with by unauthorized persons,
misused, abused, or improperly installed and has been used in accordance with
the instructions and/or ratings supplied. This warranty is in lieu of any other
warranty or guarantee expressed or implied. BALDOR shall not be held
responsible for any expense (including installation and removal),
inconvenience, or consequential damage, including injury to any person or
property caused by items of our manufacture or sale. (Some states do not allow
exclusion or limitation of incidental or consequential damages, so the above
exclusion may not apply.) In any event, BALDOR’s total liability, under all
circumstances, shall not exceed the full purchase price of the control. Claims
for purchase price refunds, repairs, or replacements must be referred to
BALDOR with all pertinent data as to the defect, the date purchased, the task
performed by the control, and the problem encountered. No liability is assumed
for expendable items such as fuses.
Goods may be returned only with written notification including a
BALDOR Return Authorization Number and any return shipments must
be prepaid.