Specifications
6-2 Specifications and Product Data MN715P
Display:
Control Specifications:
Control Method Sine wave Carrier input, PWM output
PWM Frequency Rated @ 7.5kHz
V/Hz Ratio Linear with adjustable Torque Boost
Transistor Type IGBT (Insulated Gate Bipolar Transistor)
Torque Boost 0 to 15% adjustable
Brake Torque Up to 60%, external resistor required
Accel/Decel Time Separate rates, 0.1 to 60 sec.
Base Frequency 50 or 60Hz
Frequency Setting 0-10VDC, 4-20mA, and Rotary on front panel
Accel/Decel Separate Accel/Decel rates (0.1 - 60 seconds)
Auto Start ON or OFF
Protective Functions Inverter trip – Over voltage, over current, under
voltage, motor overload
Short Circuit – Phase to phase and phase to ground
Analog Input:
Potentiometer Input 0 - 10VDC
Input Full Scale Range 0-10VDC and 4-20mA
Differential Input Common
Mode Rejection
40db
Input Impedance
20k
Digital Inputs: (3 Inputs)
Digital Inputs Forward
Reverse
Stop
Input Impedance
6.8k (Closed contacts standard)
Leakage Current
10A Maximum