Specifications

Removable Keypad
The Baldor keypad is designed to be removed from the main control and
mounted up to 100 feet away. This will allow the control to be mounted in
a convenient location, and the keypad near the operator for ease of use.
English Display
The keypad displays both the operating conditions and the programming
steps in easy to follow English. This eliminates the need to look up
parameter numbers, program the wrong setting and all the other “easy”
mistakes when working with codes.
Single Function
Each key has one function.There is not a whole set of “second operations”
that each key can perform confusing the operator.
Block Programming
It is easy to adjust the control. Most controls force the operator to scroll
through every parameter to get to the one desired. With block
programming, the adjustments are in blocks of like adjustments. For
example, if you wanted to adjust a preset speed, you would find the block
that says: Press ENTER for preset speeds. If you didn’t want a preset
speed your arrow keys take you to the next block of adjustments.
Input Terminals
The terminal connections allow control of the drive from a potentiometer
(power provided), a set point controller (PID) through analog input or a PLC
(or switch closures) for discrete preset speeds.
Output Terminals
The control provides two programmable analog (0 - 5VDC) outputs.
These outputs can be used to run meters or as an input to other controls
for “leader/follower” applications. The control also provides two optically
isolated discrete outputs along with two Form C relay outputs. The opto’s
are powered by a 5 - 30VDC power supply, and the relays are capable of
switching up to 230VAC. The outputs are programmable for settings such
as Ready, At Speed, Zero Speed, Reverse, Fault, etc.
LED’S On Action Keys
There is one LED on each of the following: JOG, FWD, REV and STOP.
These LED’s are “ON” whenever the COMMAND is active. When you
command FORWARD - the LED in the FWD key comes on (STOP and
REV are off). These LED’S are still active when you are controlling from
the terminal strip, plc, switch closures, etc. The active LED lets the
operator know the command has been received and accepted (no broken
wires or dirty contacts).
Series 15H Features
FWD MOTOR SPEED
LOCAL 1750 RPM
PRESS ENTER FOR
PRESET SPEEDS
PRESS ENTER FOR
INPUT
PRESS ENTER FOR
OUTPUT
COMMAND SELECT
P: POTENTIOMETER
ENTER
JOG
FWD
5