Specifications
AC Servo Drive Solutions
Brushless AC Servo Drive
>
Flexible and versatile drive range
>
RS232/485 serial port for
commissioning or connection to
external PLC
>
Programmable I/O capability
>
Choice of simple drive with the
FlexDrive-II or indexing capability with
the Flex+Drive-II
>
Mint programmable capability (single
task) with Flex+Drive-II
FlexDrive-II
Flex+Drive-II
FlexDrive-II is a flexible servo drive for the control of both rotary servo motors and linear motors.
FlexDrive-II can accept the industry standard ±10V analog input, pulse and direction for stepper
replacement applications, or electronic handwheel for simple gearing.
Flex+Drive-II extends the capability of FlexDrive-II with the ability to perform point-to-point moves,
initiated from the onboard I/O. Further flexibility is provided with its onboard Mint programming
capability.
Configurable I/O
The onboard I/O of both FlexDrive-II and Flex+Drive-II can
be programmed from the Mint WorkBench using a table
driven user interface. This provides an easy interface to an
external device such as a PLC. Up to two conditions can be
combined using different logical operators to provide an
output action. This can include setting or clearing any of the 3
digital outputs, forcing the drive into a particular state or even
jogging the motor at a predefined speed.
Flexible Drive Command Input
An industry standard ±10V analog input provides either
a torque or velocity control signal. The input can be
programmed for ±10V, 0-10V with direction or ±5V.
Alternatively, the drives can be setup in a gearing mode
following the onboard master encoder at a predefined gear
ratio. The master encoder can be configured for quadrature
input or 5V step and direction. A 24V step and direction
input can also be used on this mode to provide the ultimate
flexibility.
Windows based table driven user interface allows
simple logic to be configured for interfacing to an
external device such as a PLC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com