User guide
BBA0914
©2014 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
INSTALLATION INSTRUCTIONS
Mounting the Amplifier:
1) Choose a mounting location that is well ventilated. The Amplier generates signicant heat
when operating at high power levels.
2) It is preferable to mount the unit such that the ventilation ns are vertical or facing upward.
3) Drill 1/8” (or 3mm) pilot holes in the mounting surface corresponding to the 4 mounting
flanges of the amplifier. Be sure not to drill into any critical areas of your spa.
4) Fasten the amplier to the surface securely using the 4 included tapping screws.