Installation manual

61
12
12:00 AM
Disable
12:00 AM
Scene 1
Select Devices
Scene Timout
Timers
Timer 1 Start
Timer 1 Stop
Days To Run
12
12:00 AM
Disable
12:00 AM
Scene 1
Select Devices
Scene Timout
Timers
Timer 1 Start
Timer 1 Stop
Days To Run
12
12:00 AM
Disable
12:00 AM
Scene 1
Select Devices
Scene Timout
Timers
Timer 1 Start
Timer 1 Stop
Days To Run
12:00 AM
12:00 AM
No
No
Scene 1
Timer 2 Start
Timer 2 Stop
Days To Run
Allow Heat
Rename Scene
Run In Vacation
Scene 1
Clear Scene
(3) Scene Control: Scene will show as Unused until set up. Press Select to turn Scene On or Off.
(4) Select Devices: Right Arrow to show list of equipment available. Press Select to link device to scene (menu not shown).
(5) Scene Timeout: Press Select. The hours will flash, waiting for your changes. Then Arrow Up or Down to set Scene timeout
in hours (1 to 12). The default is 12 hours. Press Select to set. (Note: The Timeout is the length of time a Scene will run if
turned on manually and not turned off.) (6) Timers: Press Select to Enable or Disable Scene running at designated times.
(7) Timer 1 Start: Press Select, then Arrow Up or Down to set time for Scene to begin. As the hour flashes, press the Arrow
Up/Down key. Press Select. As the minute flashes, press the Arrow Up/Down key. Press Select. Arrow Left to Exit.
(8) Timer 1 Stop: Press Select, then Arrow Up or Down to set time for the Scene to end.
(9) Days to Run: Right Arrow, then Press Select for each day you want the Scene to run automatically at the set time. Left
Arrow to Exit.
Menu 10:
(10a) Timer 2 Start, Timer 2 Stop, and Days to Run. Repeat steps 7-9.
(10b) Allow Heat: Press Select to designate whether heat should run during Scene.
(10c) Rename Scene: Right Arrow to name or rename the programmed Scene.
(10d) Run in Vacation: Press Select to Enable or Disable the Scene while in Vacation Mode.
(11) Clear Scene: (Scroll down past “Run In Vacation”) Press Select to clear a programmed Scene. Confirm Yes or No.
Repeat for any other Scenes that are created.
78
9
10 11
12
12:00 AM
Disable
12:00 AM
Scene 1
Select Devices
Scene Timout
Timers
Timer 1 Start
Timer 1 Stop
Days To Run
6
Left Arrow to Exit
A scene can also be manually turned on or off. If multiple devices are assigned to a scene, they will turn on or off
simultaneously when the scene is turned on or off.