Installation manual

46
IMPORTANT: The first thing you must do before making changes to the configuration is to create
communication between the system and the panel by “Training” the panel as described below:
The system should be powered up. You will need to be standing in front of the System Box within reach of the
Service Panel within the box.
1. From the Home Display Screen (Mode-Pool/Spa highlighted) on the Wireless Panel, Arrow Right.
2. Scroll down the Main Menu to highlight Setup. Arrow Right.
3. Scroll down the Setup Menu to highlight Wireless Setup. Arrow Right.
4. Be sure “Add Me” is highlighted.
5. On the Service Panel in the System Box, press the Network button.
6. On the Service Panel, use the Up and/or Down buttons until “Add Device” appears on the Service Panel Display.
7. With “Add Me” highlighted on the Wireless Panel, press the Select button on the Wireless Panel and a prompt
should appear for steps 8 and 9 below.
8. With “Add Device” showing on the Service Panel, press “Select” on the Service Panel.
9. Press the Select button on the Wireless Panel again. “Panel Added” will appear briefly on the Wireless Panel and
then revert to the Home Screen “Adding... OK” will appear on the Service Panel display. The Service Panel display
will revert to “Automatic Mode” after a short time.
Repeat if the attempt to add the panel is not successful
.
Left Arrow to Exit.
The Main Menu Screen options shown may be displayed in a different order on your control and will only appear if
available on your system.
Mode-Pool
Pool Light
Spa Light
Filter Pump
Heater
Pool Temp
Air Temp
10/09/06 Pool Set 80F
Monday 12:42 PM
Alert/Error
Select
Arrow Left
Arrow Down
Arrow Up
Arrow Right
7 LEDs correspond to the 7 items
on the left side of the display .
They light to indicate operation or alert.
(Display Screen)
Fig. 32 Poolux Wireless Panel
Mode Pool
Pool Light
Spa Light
Filter Pump
Heater
Pool Temp
Air Temp
10/09/06 Pool Set 80F
Monday 12:42 PM
Alert / Error
123
4
Filter Cycles
Panel LEDs
Wireless Setup
Rename Devices
Reorder Devices
Day and Time
Setup
Main Menu
Device Control
Scenes / Timer
Heater
Chemistry
Mode Pool
Setup
Setup
Add Me dd Me
Remove Meeless Setup
Add Device
Remove Device
Network ID D9FE
Panel ID 0040
Wireless Setup
Add Device
Add Device
Configuring the System: Step 1 - Training the First Wireless Panel
BASIC PANEL FUNCTIONS
TRAINING THE WIRELESS PANEL