Installation manual

12
Package Content
• DETERMINE THAT YOU HAVE EVERYTHING NECESSARY TO COMPLETE THE INSTALLATION.
• FIND A SUITABLE MOUNTING LOCATION FOR THE SYSTEM CONTROL CENTER, RECEIVERS AND PANELS.
• PLAN AND DETERMINE WHERE COMPONENTS WILL BE PLUMBED.
• PLAN WIRE RUNS AND WIRING CONNECTIONS.
WHAT IS INCLUDED:
System Control Center (P/N# 53691)
w/ECOmatic (P/N# 54210)
Wireless Panel (P/N# 53963)
w/charging base and wall adapter
Wireless Transceiver (P/N# 53696)
Valve Actuators (P/N# 40499)
10’ Air Temp Sensor (P/N# 23427)
25’ Water Temp Sensor (P/N# 23428)
ECOmatic ESC 24/36/48 Chlorine
(on systems w/optional chlorine generators)
Cell (P/N# 71004)
Cable (P/N#
7114 4)
User’s (Operation) Manual (P/N# 40628)
Installation Manual (P/N# 40627)
Dolphin™ II Pool Remote Control (P/N# 54186)
Dolphin™ RF Transceiver (P/N# 53770)
ACCESSORIES AVAILABLE FOR PURCHASE:
Spa-Side (4-button) Panel
w/100’ cable (P/N# 53695)
75’ Solar Temp Sensor (P/N# 23429)
pH Sensor (P/N# 30292)
ORP Sensor (P/N# 30315)
Conductivity Sensor (P/N# 27622)
Filter Pressure Sensor, 100 psig (P/N# 30807)
Expansion Control Center (P/N# 53692)
Additional Valve Actuators (P/N# 40499)
WHAT IS NOT INCLUDED:
Circuit Breakers
None are included with the Poolux.
See inside of door for suitable breakers.
Wire
Wire/conduit for 100A service from house
main electrical panel to the System
Control Center.
Wire/conduit for filter pump and other high
voltage loads.
Wire for bonding.
Expansion Box
None are included with control.
Cable for the expansion box. (Available at any
home center.)
Miscellaneous
Mounting hardware (screws, etc.) for
mounting system and control panels.
Valve, actuator, and solar sensor for solar
control option.
Additional cable for the solar sensor may be
required. (This two wire cable is available at
any home center.)
BEFORE INSTALLING THE POOLUX SYSTEM: