Datasheet

2. Single tap on / wave off the MODE button (Photo Sensor button ) by “ 1 SECOND AND RELEASE”, the display will
go to different modes.
within 2cm above sensor
In a bright environment, Tap or Wave on sensor by 1 second and release
SELECT A PARTICULAR DISPLAY WITHOUT AUTO-SCROLLING
1. Tap on / wave off the MODE button (Photo Sensor button ) by “ 3 SECONDS AND RELEASE ” , it will turn off aut o- s cr olling
display and stay on particular display chosen.
within 2cm above sensor
In a bright environment, Tap or Wave on sensor by 3 seconds and release
2. Single tap on / wave off the MODE button (Photo Sensor button) by “ 1 SECOND AND RELEASE”, the display will
go to different modes.
3. To turn on Auto-scrolling display f unction again, tap on / wave off MODE button (Photo Sensor button) by “ 3 SECONDS
AND RELEASE ” . The
icon will be shown on display.
The sequence of display modes: Calendar > Temperature & Humidity > Workweek > Digital Time> Calendar
CALENDAR TEMPERATURE &
HUMIDITY
WORKWEEK DIGITAL TIME CALENDAR
REMARK: The MODE button is NOT designed for use in a Dark environment. The motion sensor uses a photo-sensing
technology designed for use in a BRI G HT environment. In a Dim environment, the MODE button may not be able
t o sense your motion and may not be operated normally.
TEMPERATURE & HUMIDITY READING:
Temperature ranges from -9.9 ~ +50.0ºC (14.2 ~ 122.0ºF) with 0.1ºC ( 0.1ºF ) resolution and Humidity Range is 5%-99%
(with 1 % resolution). Reading shows “ HI ” or “ LO ” if measured value exceeds the above r ange.