Operation Manual

~ P.8 ~
5. Which means this particular unit is receiving channel 5 at the moment. Each channel will receive on
the unit for a period of 5 seconds.
Once this area is highlighted hit the [ ] button to confirm the selection. You are then taken to a screen
similar to the below image.
By using the “/\” or “\/” arrows you can scroll between the indoor and outdoor readings. By using the
“<” or “>” arrows you can show past hours data that have been recorded, up to 24 hours. Hit the
[Esc]button to exit the Temperature & Humidity screen and return to the Information Board main screen.
Hitting the [Esc] button again will bring you back to the main menu.
3.3 Barometric Pressure
The Barometric Pressure section is the third section on the left hand side of the Information Board. See
the below image for an example.
Once this area is highlighted hit the [ ] button to confirm the selection. You are then taken to a screen
similar to the below image.
The pressure is recorded for a 24 hour time period. By using the “<” or “>” arrows you can scroll
between the different hours when the pressure was recorded. Hit the [Esc] button to exit the Pressure
screen and return to the Information Board main screen. Hitting the [Esc] button again will bring you
back to the main menu.
(ENG)