Operating instructions

8
D. SERVICING:
NOTE: THIS APPLIANCE MUST BE SERVICED BY AN AUTHORIZED SERVICE AGENT.
(1) Power supply to the unit must be disconnected before any service is performed.
(2) Most of the service on the unit can be performed from the front and/or control panel side.
(3) For proper servicing, access to the control panel side of the unit will be required.
(4) It will be necessary to have access to the back of the oven for service needs related to the
electric power supply.
(5) A system wiring diagram is provided in this manual and on the back of the service panel on the
right side of the oven.
(6) All servicing should be performed by a factory-authorized technician only.
(7) For proper maintenance and repairs, call the factory toll free (800-431-2745) for an authorized
service agency in your area.
31” Legs
Top Left Angle
Top Right Angle
1/2” Flat Washer
(4 corners only)
1/2”-13 x 1” Large
Hex Head Bolt (12)
5/16” Flat Washer (4)
5/16”-18 Hex Nut (4)
Open Rack Shelf
Rack Support
3/8”-16 x 3/4” large
Truss Head Screw
w/Nut & Washer (8)
Open Rack Stand
Figure 2
CAUTION
This product, when stacked, has
more than one power-supply
connection point. Disconnect all
power supplies before servicing.
!
!
WARNING-RISK OF FIRE
When stacked two high
maximum, use stacking kit
part # E3771A only.
!
!
Blower Wheel
Set Screws (2)
Wheel Puller Bolt 3/8”-Hex
Cleaning The Blower Wheel
Figure 1
Motor