BMPM007 Operation Manual 7 Quart Planetary mixer
Our 7 liter mixer has a high 650 Watts power to allow mixing stiffer dough's and larger batches. All metal body and counter-top style is designed professionally. Its shafts are mounted in ball bearing and 100% steel gears drive. Electronic 5-speed control helps you to enjoy non-stop shifting speed. Planetary mixing action and digital timer ensures perfect results. Simple hand lift is good for changing bowl and attachments.
1-1 SAFETY PRECAUTIONS When using this machine, always make sure the following conditions or operations are in effect. Failure to this may cause accident or injury. • Keep hand & clothing away from bowl and attachments when in operation. • Keep rigid objects away from bowl and attachments when in operation. • To protect against risk of electrical shock, do not immerse mixer in water or other liquid. • Use the machine only with the electrical service specified on its nameplate.
1-2 SPECIFICATIONS Motor: 650Watts powerful, ball bearing, ventilated within mixer enclosure. Electrical: 100-120V, single phase or 208-240V, single phase Switch & Timer: All in one digital control panel Cord and Plug: 6 feet flexible cord and plug (for 110 V model only), respectively consist of 3 wires which one wire is connected for grounding, other wires are connected to power supply.
2. INSTALLATION BEFORE INSTALL YOUR MIXER, CHECK TO BE SURE THAT YOUR ELECTRICAL SERVICE SPECIFICATIONS MATCH THOSE OF YOUR MIXER AS PRINTED ON THE MIXER'S NAMEPLATE. 2-1 LOCATION Place the mixer in its operating location. Bench should be placed on a sturdy level surface. There should be adequate space around the mixer for the user to operate the control and install and remove bowls.
3. OPERATION Note: BEFORE being put into service. This cleaning procedure should also be followed for bowls and agitators before whipping egg whites with or whole eggs. 3-1 CONTROLS All models are furnished with a digital Timer and electronic 5-speed Timer: Digital set by 1-30 minutes or non-timer service. Speed: Speed 1 - For slow beating, mashing and kneading yeast dough. Speed 2 - For mixing cookie and cake batters. Speed 3 - For beating, creaming and medium fast whipping.
3-4 HOW TO INSTALL A BOWL The bowl must be installed before the agitator. To install the bowl, fully lower the bowl support. Position the bowl so the alignment bracket on the back of the bowl is in the bowl retainer and the locating pins on the front of the bowl support fit in the holes on the sides of the bowl.
WARNING: Ensure your recipe meets mixers capacity. Ensure water is 70 Degrees Fahrenheit or reduce capacity. Ensure flour is at room temperature. Ensure mixer is turned off when changing gears. FAILURE TO COMPLY VOIDS ALL WARRANTY.
5. MAINTENANCE NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING. Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any fluid pressure. The mixer should be thoroughly cleaned after using. Bowls and agitators should be removed from the mixer and cleaned. The transmission case and planetary gears are filled special grease that will last for several years.
