Installation Manual

IMPORTANT: READ FIRST
Install of Revolver X2 Rail to Ram Box Accessory Rail
RAM BOX SUPPLEMENTAL INSTALL SHEET
Return to Step 8 of the standard install sheet
Replace any removed
factory accessory
cleats.
6
Slide the
strap and buckle
into the factory
accessory rail.
5
The strap and buckle mounting
block slides into the factory
accessory rail lower half.
Slide the strap
assembly
forward
towards
the cab.
The final placement and tightening of the strap
will happen later when the cover is in place.
Make sure the tonneau rail
is all the way forward,
so that the slotted bracket
is touching the bulkhead.
4
Cab/
bulkhead
Cab/
bulkhead
Part# 318A0064 Rev. 3.1.16
HRC