Installation guide

ManualsBrandsBaja ManualsPowersportsOfficial Baja minibike

Baja Motorsports, LLC

Set-up Instructions Mini Bike

Removal from crate

I 1. Remove cardboard carton from

metal frame.

Tool kit packet

Mso and Owners manual

3. Remove bolts as indicated in photo

from both sides of metal frame

Remove operating instructions,

manufacture statement of

origin,and owners manual

located on top of Mini Bike.

4. Carefully remove metal

packaging frame

Summary of content (4 pages)

PAGE 1
Baja Motorsports, Set-up Instructions LLC Mini Bike Removal from crate frame. I 1. metal Remove cardboard carton from Tool kit packet Mso and Owners manual . Remove operating instructions, manufacture statement of origin,and owners manual located on top of Mini Bike. 3. Remove bolts as indicated in photo from both sides of metal frame 4.
PAGE 2
Handlebar installation Cinch Nuts 1. Remove cinch nuts and washers with rubber grommets from steering bracket. . Attatch handle bar assemly to steering bracket by placing one washer and rubber grommet on top of steering bracket and one washer and rubber grommet photos) under steering bracket (see Washers with grommets 4ea. Washer and rubber grommet on top. Steering bracket Washer and rubber grommet on bottom. 3. Torque cinch nuts to 45Nm (33ft.lbs.) Cinch Nut Top handle bar clamp 4.
PAGE 3
Install rear fender and tighten Lift rear fender into position by aligning holes with fender bracket on right and left side side of mini bike. Attach rear fender with fender nut and bolt front shock bolts Fender nut and bolt. located in Tool kit packet. 2. Tighten nut and bolt securely. . Make sure front shock bolts are tight before Fender Bracket each ride, Torque bolts to 47.5Nm (35ft. Ibs.).
PAGE 4
Gas and Oil 1. Fill engine with correct amount of oil. Refer to owners manual for oil types and quantity. Gas Cap 2. Fill gas tank as specified in owners manual. Oil Cap 3. Refer to owners manual for proper starting instuctions WARNING! This Mini Bike may be shipped with packing oil in engine. This oil should be drained and replaced with new engine oil as described owners manual.