User's Manual

Wiring Diagram : Standard installation - No Start Assist. Max 40A Output

LED Indications :

To Ignition Switch of vehicle

RED

GREEN

BLACK

BROWN

ORANGE

BLUE

Chemistry Selection

LED

OFF - No Output / Check

Slow Flashing - Auxiliary Below 12VDC

Fast Flashing - Following a failed cranking -

Start Assist Activated - Check Main

ON / Solid - Normal Operation

During normal operation the Remote LED will remain solid ON as a indication of normal charging.

If occurs outside of cranking during normal operating - Return unit for recalibration.

If the LED is completely blank it is indicative of No Output from the unit.

This can be from several conditions:

• That the ignition has been turned off and the BLUE ignition wire is at 0V.

• Fuse2 may be blown - Check Fuse2 and replace if required.

• Over Temperature - No action required. NGBC will restart when temperature drops within normal

operating range.

AUXILIARY