Product Card

www.baintech.com.au
TECHNICAL SPECS - BTDC40
Maximum Charge Current 40 Amps
Input Operating Voltage Range 11VDC to 16VDC
Maximum Charge Voltage for Flooded Cell 14.5V
Maximum Charge Voltage for Lithium 14.8V
Maximum Charge Voltage for AGM/GEL 14.3V
Float Voltage 13.5V
Lithium Maintenance Charge 13.9V
Stand by Current 0.003A
Minimum Input Startup Voltage 12V
Maximum Operating Temperature 70°C
Dimensions (L x W x H) 162 x 71.5 x 32.2 mm
40A DC-DC
3-stage battery charger for
Flooded cell, Lithium and AGM/GEL
ADD ON
BATTERY
MONITOR
• Small, dash mounted unit is vital for both single and dual battery monitoring.
• Visual indications of low battery (<11.00v) and over voltage (>15.00v)
• Auto dimming display for low light conditions without the need for an extra
wire to the vehicle
• Measurements displayed both in 0.01v increments as well as bar graph
• Can be used in both dual battery mode or single battery mode
• Supplied with easy attached Velcro (so no drilling is required)
DUAL BATTERY MONITOR
TECHNICAL SPECS - BTDBM
Input voltage 5v to 17v
Current draw 35mA running - 0.4mA standby
Accuracy 50mV
Dimensions L X W X H 59mm x 44mm x 21mm
Connections 1.5M 4-Core Cable
DESIGN YOUR OFF-GRID SYSTEM
WITH THE BAINTECH POWERTOP + SOLAR BLANKET
• Compact and rugged design
• Operating temp up to 70�c
• 3-stage 12v Battery Charger:
Flooded cell, Lithium and AGM/GEL