User Guide Freedom Power Pack (FPP) Models: LBS-1250-FPP v2
User Guide Freedom Power Pack Contents 1.0 Introduction ................................................................................................................................................................. 2 2.0 Do’s and Don’ts ........................................................................................................................................................... 3 2.1 Ensure the battery is physically secure ..................................................................
User Guide Freedom Power Pack 1.0 Introduction Congratulations! You have purchased a state-of-the-art portable lithium battery and we hope you enjoy many years of trouble-free life. This User Guide describes how to connect and safely operate the 12V Freedom Power Pack (Figure 1).
User Guide Freedom Power Pack 2.0 Do’s and Don’ts This battery contains lithium iron phosphate (LFP) cells. While LFP cells are the safest Li-Ion chemistry, the stored chemical energy represents a risk of fire, burns or explosion if misused. Avoid injury to yourself and others, adhere to the warnings in this Guide.
User Guide Freedom Power Pack 2.4 Avoid repeated shock and vibration Whilst the battery is robustly constructed and protected in an aluminum enclosure, it is not designed to operate continuously in high shock or high vibration environments. Normal use in a 4WD environment is acceptable and the battery has been designed in accordance with these expected conditions. However, dropping the battery or exposing the battery to a high number of excessive vibrations may lead to a fault or failure of the battery. 2.
User Guide Freedom Power Pack 3.0 User Guide Your lithium Freedom Power Pack is a portable 50Ah lithium battery with convenient plugs to provide power for a variety of purposes. Like all electronic devices you need to treat your appliance carefully and not expose to excessive temperatures, water, dirt or undue rough handling. The FPP features: 1. 2. 3. 4. 5. 6. 7. 2 x dual USB ports (1A & 2.
User Guide Freedom Power Pack When fully charged the battery will be at 13.3-13.5V. Discontinue use when the battery is approximately 11V. It will automatically cut out at approximately 10V. 3.2 Voltmeter The voltmeter with the circular ring of LED’s will give the pack voltage and an indication on how full the battery is. When an appliance is connected, the voltage will dip a small amount and when a charge is applied the voltage will raise a small amount. This is normal.
User Guide Freedom Power Pack 4.0 Troubleshooting Guide When I turn the voltmeter on there is nothing on the screen. The battery is most likely completely discharged. Connect a charger and give the battery a good charge up. Note: if you leave your battery for an extended period you will need to use a charger that automatically provide charge without sensing any voltage from the battery.
User Guide Freedom Power Pack 5.
ADD ON: Baintech Watt Meter Take the guesswork out of how much power your solar panels are generating. The Baintech Watt meter once connected will give you real time information on: • Current (Amps/A) • Voltage (Volts/V) • Power (Watts/W) BAINTUFF 180WATT SOLAR BLANKET CTEK LITHIUM BATTERY CHARGER www.baintech.com.
