Installation Guide

Slimline Battery User Guide 2021 www.baintech.com.au
Installation & User Guide
SL Range
8
Mounting orientation
The Slimline battery can be mounted flat or on
its side in any orientation, except on its side
with the Anderson plugs at the top – in this
configuration the internal cells are upside
down which is against the manufacturer’s
recommendations.
This is the only orientation that is not allowed:
Connecting the Standard Model
The BAINTECH-1275-SL, BAINTECH-12110-SL and BAINTECH-12150-SL models contains 2 (12150 has
4) convenient grey Anderson plug connectors accessible from the side of the battery as shown in
Figure 3. Both can be used as input and outputs for charging and running loads. Or one plug could be
used to charge the battery and the second plug used for loads.
Charge sources could include:
- External AC charger with grey Anderson connector;
- External (regulated) solar charger with grey Anderson connector; or
- External DC-DC charger with grey Anderson connector.
Figure 3 – Dual Grey Anderson Plugs on 12110-SL
For connected chargers and devices, a grey Anderson plug must be used. Check to ensure the
Anderson is correctly wired (positive and negative) and do not attempt to use any coloured
Anderson other than grey.