Product Card

HAND BRAKE

ALARM

12V/24V

The Baintech Hand Brake Alarm has been designed to work with both 12V/24V vehicles, acting

on either a positive or negative handbrake and door switches. If the door is opened without the

Handbrake applied a latched alarm (both audible and visual) will go off and cannot be reset until

the Hand Brake has been engaged.

This function aids in reducing incidents of drivers exiting their vehicle without the handbrake

engaged. There is a optional Auxiliary Alarm feed that can be used to drive a relay to activate the

vehicles horn or similar external alarm device.

NO. 1

SAFETY

DEVICE

• Car, truck, 4x4 & mining vehicles

• Soon to be mandatory on all logistic sites

• Connects door & hand brake

• Safe

• Easy to wire

• Both 12v/24v

• Audible and visual alarm

CODE: BTHBALARM

www.baintech.com.au

PAGE 1
HAND BRAKE ALARM 12V/24V The Baintech Hand Brake Alarm has been designed to work with both 12V/24V vehicles, acting on either a positive or negative handbrake and door switches. If the door is opened without the Handbrake applied a latched alarm (both audible and visual) will go off and cannot be reset until the Hand Brake has been engaged. This function aids in reducing incidents of drivers exiting their vehicle without the handbrake engaged.
PAGE 2
Typical Wiring Guide Grey - AUX Alarm (Negative (-) Switching) Black - Ground (-) Purple- Positive (+) Green - Handbrake Switch Yellow - Door Switch/Dome Light Choose either Negative or Positive Setup for Each Wire There are four possible setups : Door & Handbrake Negative (-) OR Door Positive (+) Handbrake Negative (-) Door & Handbrake Positive (+) OR Door Negative (-) Handbrake Positve (+) Handbrake Dashboard Lamp Door Switch to Ground(-) NEGATIVE SETUP Interior Dome Light Cut Handbrake Switch to G