Installation Guide

Ph
07 3348 8082
E
[e-mail]
‘The Power Systems Experts’
www.baintech.com.au
Installing your Baintech GU Power Panel
You will need
1 x Baintech GU Power Panel
2 x Right angle spade terminal
Cable at the desired length
How to install your panel
1. Attach the right angle terminals to the cables
2. Connect the negative right angle spade terminal to the
negative post on the rear of the merit socket
3. Connect the positive right angle spade terminal to the
positive post on the rear of the resettable breaker
4. Connect the other end of the cable to your battery terminals
using the appropriate connection. Ensure that you connect
the positive cable to the positive terminal and the negative
cable to the negative terminal.
5. Mount the panel in the rear access panel of your Nissan GU
using the GU’s original retainer clips.