Technical information

90
Chapter 4 CARAVAN EQUIPMENT
THETFORD REFRIGERATOR
MODEL N90 E (continued)
Power with gas
1 Open the valve of the gas bottle and the gas taps.
2 Set the gas control button to the 5th position.
3 Set the energy source selector switch (a) to
Automatic ignition:
-Press the gas control button, rotary switch (C), and keep it depressed.
- Ignition takes place automatically. You will hear a ticking noise. If
ignition was successful, the noise will stop and the flame meter will
turn green. Release the gas control button.
- If the flame goes out, ignition will be repeated automatically.
- Set the desired refrigeration level by means of the gas control button,
rotary switch (C). Position 5 is the coldest setting.
Switching off the refrigerator
1. Set the energy source selector switch (A) to ;
2. Turn the gas control button, rotary switch (C) to 0 (Off);
3. The refrigerator is now completely switched off.
Note! The refrigerator is only fully switched off when both the energy
source selector switch and the gas control button are at zero. In the case
of a refrigerator with electrical ignition, when the gas control button is
not set to 0, the ignition mechanism will keep sparking. This can cause a
flat battery.