Technical information

134
Chapter 5 GENERAL
Lift up Bunk
i. Remove cushions and draw the curtains.
ii/iii. Holding bunk in both hands pull it inwards whilst lifting upwards.
iv. The bunk mechanism will automatically lock in the up position.
v. Release retaining straps on the underside of bunk base. The second
half of the bunk base can now be hinged open.
vi. Turn the turnbuckle catches located on the metal bunk legs to ensure
that the bunk cannot be folded by pushing up from below.
vii. The metal safety rails and ladder can now be slotted into position.
Slatted Bed (Fig. 1)
i. Grasp front rail.
ii. Walk backward holding rail
until bed is fully extended.
iii. Arrange seat cushions to suit.
Side Dinette Bed (Fig. 2)
i. Remove table from support
leg.
ii. Place the table top between
seats on ledge.
iii. Arrange seat cushions as
appropriate.
Warning: When children, especially those under 3 years of age, use
any bunk/bed care must be taken against the risk of them falling out.
Fig. 1
Fig. 2
ASSEMBLING THE BUNKS (continued)