Operating instructions

75
minute display will ash.
• Use the control knob/push button to set the minutes.
• Click the control knob/push button to conrm the
value
Service Menu
Query the index status of a connected device.
Change the background lighting of the control panel.
There are 5 background lighting levels to choose from.
Change language
Select the required language from those available (e.g.
English, German, French, Italian).
Display mains voltage 230 V
The symbol indicates that 230 V mains voltage (shore
power) is available
!
Warning
In the event of a warning, a warning symbol
appears to indicate that an operating perimeter
has reached an undened status. In this case,
the affected device continues to run. As soon
as the operating parameter returns to set
range, this symbol will turn off automatically.
Read out the warning code
• Use the control knob/push button to select the symbol.
• Click the control knob/push button. The current
warning code is shown. The cause of the warning can
be identied and rectied via the error list.
Cause rectied/return to setting level
• Click the control knob/push button.
Cause not rectied/return to setting level
• Press the back button.
In this case, the warning is not acknowledged on the
control panel and the warning symbol remains. The
control panel remains in the warning status. Devices
connected to the control panel can be operated.
Malfunctions
In the case of a malfunction, the control panel
immediately jumps to the menu level “malfunction” and
shows the error code of the malfunction.
Cause remedied/return to setting level
• Click the control knob/push button.
• The respective device is restarted.
If the cause is not remedied, the malfunction will occur
again and the control panel will jump again to the menu
level “malfunction”
Cause not remedied/return to setting level
• Press the back button.
In this case, the malfunction is not acknowledged
in the control panel and the warning symbol
!