Operating instructions

74
Enter end time point
• Use the control knob/push button to set the hours,
then the minutes.
!
If the start times are exceeded when entered,
the operating parameters are only taken into
consideration when the next start/end times
are reached. Until then, the operating
parameters set outside the timer remain valid.
Set the room temperature
• Click to change to the setting level.
• Use the control knob/push button to select the
required room temperature
• Click the control knob/push button to conrm the
value.
Set the warm water level
• Click to change to the setting level
• Use the control knob /push button to select the
required warm water level.
• Click the control knob/push button to conrm the
value.
Select power type
• Click to change to the setting level.
• Use the control knob/push button to select the power
type.
• Click the control knob/push button to conrm the
value.
Select fan level
• Click to change to the setting level.
• Use the control knob/push button to select the
required fan level.
• Click the control knob/push button to conrm the
value.
Activate the timer (ON)
• Click to change to the setting level.
• Use the central control knob/push button to activate
the timer (ON)
• Click the control knob/push button to conrm the
value.
!
The timer remains active, even for several days,
until it is deactivated (OFF).
Deactivate the timer (OFF)
• Click to change to the setting level
• Use the control knob/push button to deactivate the
timer (OFF).
• Click the control knob/push button to conrm the
value.
Set time
•
The hour display ashes.
• Use the control knob/push button to set the (24h
mode).
• After clicking the control knob/push button again, the