Operating instructions

27
DISPLAY COLOUR ATC
CONDITION
DIAGNOSIS WHAT TO DO OUTCOME STATUS
Green ATC Active Everything OK Green Flashing ATC Active
Self Test incomplete
Drive forward to detect movement to complete self test and re check LED
Green (constant)
Red ATC Inactive
Possible to Continue Journey
Remove 13 pin plug and wait 5 second. Reconnect plug
Green Ready for journey Red
ATC Error logle memory exceeded. Caravan can be towed, but ATC will not apply caravan brakes in the event of instability. See below *.
Red Flashing
ATC has detected a fault
Do not continue with ATC connected
Remove 13 pin plug and wait 5 second. Reconnect plug
Green Ready for journey Red (ashing)
ATC Faulty, and cannot be driven. Remove push rod as shown on page 5. Consult AL-KO .
LED not Working
ATC has no power
Check push rod position.
Remove 13 Pin plug and wait 5 seconds Reconnect the plug. Check for constant live- refer to system requirements.
Green Ready for journey
LED faulty
LED not working
If power ok, check push rod position. Red line visible- do not drive vehicle. Red line not visible- possible to continue journey but consult AL-KO.