Operating instructions

104
32. REMIS BLINDS
REMIBASE PLUS WINDOW BLINDS.
Please note the blinds should not be in the closed
position when the vehicle is travelling or when in storage
for extended periods.
The sunscreen is housed at the bottom and the yscreen
at the top of the blind. To open either hold the cross bar
and pull up or down. Both blinds can be fully extended
to totally cover the window or can meet at any position
to give sun shading/privacy and protection from insects
entering the vehicle.
The blinds are pre set to the correct tension.
If re-tensioning is required please follow these steps:
The blind needs to be taken down from the wall by un-
screwing the 4 corner screws.
Lay the blind face down on a table with the cross bars of
both blinds meeting in the middle.
The black cords re-tension the y screen and the white
cords re-tension the sun screen.
The cords are xed at either side with a screw. Loosen
this screw and gently pull the cord 5mm tighter and
repeat on the other side ensuring the crossbar is level.
Test the tension. This process can be repeated if
necessary.
Cleaning:
The actual plastic proles can be cleaned with a non
abrasive cleaner and damp soft cloth. The blinds should
only be dusted lightly with a soft cloth.
Remi Flair
Function:
Both the sun screen and y screen are stored at the
top. The sun screen can be pulled down and xed at any
of the stops in the side supports. The y screen can be
pulled down and xed at the bottom of the side supports.
When released from the xing points the blinds will
automatically retract. BEWARE: DO NOT ALLOW THE
BLINDS TO RETRACT TOO FAST AS THIS WILL CAUSE
DAMAGE
Re-tensioning. If this is required on either blind the
screw slot on the side should be turned once and the
blind tested. If the tension is still not correct a further
turn may be required.
Maintainance. The sun screen can be wiped with a non
abrasive cleaner as can the cassette holder. The y
screen can be cleaned with a soft brush.
Neither blind should be closed ( in the down position)
when
the vehicle is being towed or in storage for prologed
periods