Technical information

116
Chapter 4 CARAVAN EQUIPMENT
REMIflair Combination Window Blinds.
Operation and Care
The cassette contains a sun screen and a fly screen blind.
The fly screen is operated by gently pulling down the handle nearest the
window. It is designed to be either fully up or fully down. Push the
handle towards the window until the crossbar hooks into the catch. To
release blind push the handle downwards and gently towards you. This
will unhook the catch and the blind can be raised.
The sun screen blind is operated in the same way with the exception that
it can be positioned at various ‘stop’ points.
Caution : with both blinds it is important to guide the blind back into the cassette
taking care not to allow it to re-wind too fast as this will damage the spring.
Retensioning
REMIflair blinds are delivered with the correct amount of tension in the
spring. However, it may be necessary in the future to adjust the spring.
On the left hand side of the cassette you will find two tensioning screws.
The top one is for the fly screen and the lower screw is for the sun screen.
Rotate clockwise 1 or 2 turns until the correct tension is reached. The
blinds should rewind without stopping or in a sluggish manner. Take
care not to over tighten the spring.
Cleaning.
Clean the cassette, side tracks and fabrics with warm water and a mild
detergent. Avoid the use of cleaners with solvents or abrasives.
Caution: it is not recommended to leave the blinds pulled down for long periods
of time. This can result in material distortion and spring fatigue.