Installation Guide

35
10. Exit vi, enable the new create VLAN interface, Figure 5-17 enable the new network
configuration
Figure 5-17 enable the new network configuration
5.6 TR-069 Settings
In the left navigation bar, choose “System> TR-069”, as shown in Figure 5-18 TR-069.
Figure 5-18 TR-069
1. Set “TR-069” as “Enable”.
2. Select WAN Interface from the list. Select WAN1 if using VLAN; Select WAN2 if not, this interface
IP is reported to OMC within the inform message.
3. Enter parameters such as ACS Address and click ‘SAVE & APPLY’ button