Installation Guide

19
pole.
Figure 4-2: Mounting Bracket
2. Fit the bracket to the pole at the appropriate height. Turn the 2 omega clamps to the proper
position, as shown in Figure 4-3, and tighten the 4 screws. Make sure the arrow on the
installation bracket is pointing upward.
Figure 4-3: Attach Bracket to Pole
3. Using the 2 pins on the back of the SmartUPS, securely attach the unit to the bracket on the
pole (Figure 4-4).
Figure 4-4: Attach SmartUPS to Bracket
4. Tighten the 2 screws on the top of the bracket using a cross screwdriver (Figure 4-5).