Installation Instructions
35
In previous Filter configurations, you can select the schedule index like below figure.
Figure 60: Schedule Settings
3.8. NAT Menu
3.8.1. Port Forwarding
When NAT mode is enabled as the WAN interface type (section 3.5.2), you can redirect a communication
request from one address and port number combination to another. Only the IP address on the WAN side is
open to the Internet. If a computer on the LAN is enabled to provide services for the Internet (for example,
work as an FTP server), port forwarding is required so that all access requests to the external server port
from the Internet are redirected to the server on the LAN.
To add a port forwarding rule, select the Enable check box and click on ADD LIST (Figure 59). Enter the
parameters per the field descriptions in Table 7.
Figure 61: Port Forwarding settings