Installation Instructions
31
3.7. Security Menu
3.7.1. IP Filtering
When using a firewall server in the local network, invoke this setting to enable or disable the firewall for
this CPE (Figure 52).
Figure 52: Firewall Basic Settings
When enable IP/Port Filtering, then the IP/Port Filter can be set.
Figure 53: IP / Port Filtering
Settings:
(1) IP/Port Filtering Mode: Blacklist, White list
(2) IP/Port Filtering Log Dropped: enable / disable
(3) Destination IP Address: the destination IP Address of the filter
(4) Source IP Address: the source IP Address of the filter
(5) Protocol: TCP, UDP, TCP/UDP, ICMP, ALL
(6) Destination Port Range: the range of port
(7) Source Port Range: the range of port
(8) Schedule Index: Select box, if can be schedule by APPs
(9) Remarks
3.7.2. IPv6 Filtering
When enable IP/Port Filtering, then the IP/Port Filter can be set.