Installation Guide

9
multimeter
Construction Safety 2.3
1. The installation personnel must master the basic safe operation knowledge, through
the training, and having the corresponding qualifications.
2. Before installation, the installation personnel must be prepared with safety protection,
such as: safety helmet, safety belt, reflective clothing, gloves, and safety shoes, etc.
3. Before installation, the installation personnel must cross-check each other to ensure
above preparations have done.
Installation Environment 2.4
2.4.1 Location Requirements
1. Avoid locations of warehouses and gas stations with flammable and explosive, and
locations that fire and explosion are easy to happen during production. Do not install
gNBs near dangerous industries and enterprises. Stay away from high voltage lines
and railroads.
2. Under the premise of not affecting the layout of the gNB, the existing
telecommunications building, post and telecommunication office or microwave
station should be chosen as the site as far as possible. The existing machine room,
power supply and tower facilities should be used sufficiently.