Installation Guide

8
Item
Figure
Description
Pole
The diameter of the pole is between 40mm to 100mm
of hot-galvanized steel pipe
Channel steel and equal angle steel installation are
also supported. The width of the channel steel is
50mm to 100mm; the length of side of the angle steel
is 63mm to 80mm.
Distribution
box
AC Air switch, socket, power grounding point,
broadband access is all in the distribution box, which
must be waterproofed.
Cold shrink
tube
The waterproof protection material on the gNB side is
provided with the device. But the customer need to
prepare the waterproof protection material on the peer
side.
NOTE: Other accessories have been packed in the packing box.
Installation Tools 2.2
The following standard tools may be needed during the installation.
Level bar
Marking pen
Knife
Vise
Wrench
Percussion drill and
some drill heads
hammer
Cross screw
driver
Cable vice
Tape measure
5mm L-shape allen
wrench
T7 screwdriver
head
Ladder
compass
fixed pulley