Installation Guide

4
Item
Description
Channel Bandwidth
N48: 10/20/30/40 MHz
Multiplexing
2x2 MIMO (DL)
Security
Radio: SNOW 3G/AES-128
Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128,
SHA-256)
1.4.2 Interface
Item
Description
Ethernet Interface
1 optical (SFP+) and 1 RJ-45 Ethernet interface (1 GE)
Power Supply
-40VDC to -57VDC, nominal -48VDC
Protocols Used
IPv4, UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069,
HTTP/HTTPs, DHCP
Network
Management
IPv4, HTTP/HTTPs, TR-069, SSH, Embedded EPC
VLAN/VxLAN
802.IQ/VxLAN
LED Indicators
4 x status LED
PWR/ACT/RUN/ALM
Antenna Connection
2T2R N-Type connectors for external high-gain antenna
GPS Antenna
External GPS antenna, N-Type connector
1.4.3 Performance
Item
Description
User Capacity
32 active users, 64 RRC connected users
Latency
30 milliseconds
Receive
Sensitivity
-95 dBm (per channel)
Modulation
UL: MCS0 (QPSK) to MCS28 (256QAM)
DL: MCS0 (QPSK) to MCS27 (256QAM)
Transmit Power
Range
0 to 37 dBm per channel (combined 40dBm, configurable)
(1 dB interval)
Quality of Service
Complied with 3GPP standard 5G QoS Identifier (5QI)
ARQ/HARQ
Supported
Synchronization
GPS
NOTE: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.