Configuration Guide
63
Parameter Description
ShortDrxCycle Short DRX cycle.
ShortDrxCycleTimer Short DRX cycle timer.
DrbInactivityTimerConfig
DRB inactivity timer.
3. In the SST list, click to display the SST configuration parameters, which
description is shown in Table 7-28.
Table 7-28 SST Parameter Description
Parameter Description
SST Enable or disable SST.
SstResourceType SST source type.
MaxResourceReserved
The maximum reserved resource.
Range is from 0 to 273.
MinResourceReserved
The minimum reserved resource.
Range is from 0 to 273.
4. Click “Save” to complete the QoS setting.
Configure TestMAC
7.18
NOTE: In this software version, testMAC does not be supported.










