Configuration Guide

61
Parameter Description
 ON: Enable
 OFF: Disable
ClpcPucchSinrEnable
Enable or disable Clpc PUCCH SINR.
 ON: Enable
 OFF: Disable
ClpcPucchBlerEnable
Enable or disable Clpc PUCCH BLER.
 ON: Enable
 OFF: Disable
3. Click “Save” to complete the PUCCH setting.
Configure QoS
7.17
1. In the left navigation column, select “NR Setting > QoS” to enter the QoS
configuration page, as shown in Figure 7-13.
Figure 7-13 QoS Setting
2. In the QoS list, click to display the QoS configuration parameters, which
description is shown in Table 7-27.
Table 7-27 QoS Parameter Description
Parameter Description