Configuration Guide

59
Parameter Description
Format Ind  widebandPMI
 subbandPMI
3. Click “Save” to complete the CSI setting.
Configure SRS
7.13
NOTE: In this software version, SRS does not be supported.
Configure PUSCH
7.14
1. In the left navigation column, select “NR Setting > PUSCH” to enter the PUSCH
page, as shown in Figure 7-10.
Figure 7-10 PUSCH Setting
2. Input the value of “UlMcsLimit”. Range is from 0 to 28.
3. Click “Save” to complete the PUSCH setting.
Configure PDSCH
7.15
1. In the left navigation column, select “NR Setting > PDSCH” to enter the PDSCH
page, as shown in Figure 7-11.