Configuration Guide

56
7.8.8 Multi PLMN
1. Click + in the front of “Multi PLMN” to display multi PLMN configuration
parameters.
2. Whether enable multi PLMN.
3. Click “Save” to complete the multi PLMN setting.
Configure PLMN
7.9
1. In the left navigation column, select “NR Setting > PLMN” to enter the PLMN
configuration page, as shown in Figure 7-7.
Figure 7-7 PLMN Settings
2. Click to display PLMN configuration parameters, as shown in Table 7-22.
Table 7-22 PLMN Parameter Description
Parameter Description
Cell ID Cell ID. Range is from 0 to 68719476735.
TAC TAC. Range is from 0 to 16777215.
Ranac Ranac
3. Click “Save” to complete the PLMN setting.