Configuration Guide

54
Parameter Description
50.
SSB Absolute Freq
The frequency point of SSB. Range is from 0 to
3279165.
SsbResourceReserved
The reserved resource of SSB.
 ON: Enabled
 OFF: Disabled
2. Click “Save” to complete the SSB setting.
7.8.4 UL RSSI Measurement
NOTE: In this software version, UL RSSI does not be supported.
7.8.5 DRX
1. Click + in the front of “DRX” to display Discontinuous reception (DRX)
configuration parameters, as shown in Table 7-19.
Table 7-19 DRX Parameter Description
Parameter Description
DRXOnDurationTimer The duration timer of DRX.
DRXInactivityTimer The inactivity timer of DRX.
DRXHarqRttTimerDL
The number of symbols received in the downlink BWP
transfer block. The retransmission of the downlink
process will be scheduled after this timer ending. The
scheduling window is within drX-RetransmissionTimerdl.
Range is from 0 to 56.
DRXHarqRttTimerUL
The number of symbols received in the uplink BWP
transfer block. The retransmission of the uplink process
will be scheduled after this timer ending. The scheduling
window is within drX
-RetransmissionTimerUL. When the
last symbol of PUSCH is sent, the
drx-HARQ-RTT-TimerUL starts up.
Range is from 0 to 56.
DRXRetransmissionTimer
DL
The downlink retransmission timer of DRX.
DRXRetransmissionTimer
UL
The uplink retransmission timer of DRX.
LongDRXCycle Long DRX period.
DRXStartOffset
Specify the start sub frame of the DRX period.
Range is
from 0 to 10239.