Configuration Guide

45
Figure 7-5 XN Settings
2. In the XN list, click to pop up the XN configuration parameters.
3. Input XN parameters, the parameter description is shown in Table 7-12.
Table 7-12 XN Parameter Description
Parameter Description
PLMNID PLMN ID
RemoteAddress The remote IP address.
XnLinkEnable
Enable or disable the XN link.
 ON: Enable
 OFF: Disable
XnHoEnable
Enable or disable the XN handover.
 ON: Enable
 OFF: Disable
BlackList IP IP addresses of the black list.
4. Click “OK” to complete the XN setting.
5. In the XN black list, click to pop up the black configuration parameter.
6. Input the IP addresses of the black list.
7. Click “Save” to complete the black list setting.
Configure PCI
7.6
1. In the left navigation column, select “NR Setting >PCI” to enter the PCI
configuration page, as shown in Figure 7-6.