Configuration Guide

43
 SIB5
The parameter description of SIB1 is shown in Table 7-10.
Table 7-10 SIB5 Parameter Description
Parameter Description
Enable Enable or disable SIB5.
SIB5 valueTag The tag of SIB5 value. Range is from 0 to 31.
Configure ANR
7.4
1. In the left navigation column, select “NR Setting >ANR” to enter the ANR
configuration page, as shown in Figure 7-4.
Figure 7-4 ANR Settings
2. Input ANR parameters, the parameter description is shown in Table 7-11.
Table 7-11 ANR Parameter Description
Parameter Description
Enable
Enable or disable the function.
 ON: Enable
 OFF: Disable
InterFeqEnable
Enable or disable the inter-frequency.
 ON: Enable
 OFF: Disable