Configuration Guide

40
Parameter Description
dB, the UE will reselect this cell.
Range is +24 to -24. A typical value is 0dB.
QRxLevMinOffsetCell
Cell minimum received level offset. This parameter
represents the cell’s minimum received level offset. It is
used only when the UE resides in the VPLMN and cell
selection is triggered due to periodic searches for
high-priority PLMNS. Range is from 1 to 8.
QQualMinOffsetCell
Cell minimum received signal quality offset. This
parameter represents the cell’s minimum receive
d signal
quality offset. Range is from 1 to 8.
CIO
Cell Individual Offset (CIO) is this neighbor eNB’s cell
offset, which is one of the variables used to determine
which eNB will best serve a given UE.
Range is +24 to -24. A typical value is 0dB.
Blacklisted Black list. Range is 0 or 1.
TAC
Tracking
Area Code (TAC) of this neighbor cell. Range is
from 0 to 16777215.
No Remove No remove identity. ON or OFF.
gNBIdLength The length of the gNB ID.
5. Click “Save” to complete the setting of the NR neighbor frequencies and cells.
Configure SIB
7.3
In the left navigation column, select “NR Setting >SIB” to enter the SIB configuration
page, as shown in Figure 7-3.