Configuration Guide

39
Parameter Description
SSBlocksConsolidationS
inr
The consolidation of SSB blocks of
Signal to Interference
plus Noise Ratio (SINR). Range is from 0 to 127.
NrofSSBlocksToAverage
This parameter indicates the signal qu
ality of a cell in NR
measurement of SSB. Range is from 2 to 16.
RsrpOffsetSSB The SSB offset of RSRP. Range is from 0 to 30.
RsrqOffsetSSB The SSB offset of RSRQ. Range is from 0 to 30.
SinrOffsetSSB The SSB offset of SINR. Range is from 0 to 30.
RsrpOffsetCsiRs The CSI-RS offset of RSRP. Range is from 0 to 30.
RsrqOffsetCsiRs The CSI-RS offset of RSRQ. Range is from 0 to 30.
SinrOffsetCsiRs The CSI-RS offset of SINR. Range is from 0 to 30.
BitmapType Bitmap type. Range is 0, 1, 2.
Bitmap Bitmap. Range is from 0 to 18446744073709551615.
DeriveSSBIndexFromCe
ll
Whether the frame boundaries of all cells at this
frequency point are the same. Range is 0 or 1.
FreqBandIndicatorNR
The indicator of NR frequency bandwidth.
Range is from
0 to 1024.
Offset To Point A The offset of Point A. Range is from 0 to 2199.
SSB Sub Carrier Offset The sub carrier offset of SSB. Range is from 0 to 31.
PLMN PLMN ID
NR Neighbor Cell
4. In the Cell Neigh list, click to enter the page for adding a neighbor cell, the
parameter descriptions are given in Table 7-5.
Table 7-5 Neighbor Cell Parameter Description
Parameter Description
PLMNID PLMN ID
CID Unique identification number for the Cell.
NRARFCN Frequency point of the neighbor cell.
SSBFrequency The frequency of SSB. Range is from 0 to 3279165.
ReferenceSubcarrierSpa
cing
The space between reference subcarriers.
Range is from
0 to 4.
PhyCellID
Physical Cell Identifier (PCI) of the neighbor cell. Range
is from 0 to 1007.
QOffset
Frequency offset this neighbor cell. Indicates the
difference in signal level between the serving and this
neighboring eNB, as determined by the received signal
level at the UE. If the received signal level is better from
a neighboring eNB by at least this amount of difference in