Configuration Guide

34
7. Configure NR Parameter
Configure LTE Neighbor Frequency and Cell
7.1
1. In the left navigation column, select “NR Setting > LTE Freq/Cell” to enter the LTE
neighbor frequency and cell configuration page, as shown in Figure 7-1.
Figure 7-1 LTE Neighbor Frequency/Cell Settings
Users can add, modify, and delete the LTE neighbor frequency and cell. Up to
eight LTE neighbor frequencies and 16 LTE neighbor cells can be set.
2. Input TRSelectionNR. (Range from 0 to 7 integer)
LTE Neighbor Frequency
3. In the neighbor frequency list, click to enter the page for adding a LTE
neighbor frequency. The parameter descriptions are given in Table 7-1.
Table 7-1 LTE Neighbor Frequency Parameter Description
Parameter Description
CarrierFreq The carrier frequency, range is from 0 to 3279165 (integer).
AllowdMeasBan
dWidth
Allowed measurement bandwidth.
PresAntennaPor
t1
The current antenna port. Range is 0 or 1.
Q_OffsetRange Indicates the difference in signal level between the serving and