Configuration Guide

31
1. In the left navigation column, select “BTS Setting > Sync Setting” to enter the
synchronization configuration page, as shown in Figure 6-3.
Figure 6-3 Synchronization Mode Setting
2. Select GPS source.
 GPS
 GLONASS
 BEIDOU
 GALILEO
 QZSS
3. Input PPS time offset. Range is from 0 to 5,000,000ns.
4. Click “Save” to complete the synchronization setting.
After the GPS synchronization is successful, the current synchronization source,
GPS synchronization status, synchronization status, latitude, longitude, and number
of satellites are displayed on this page.
Configure Energy Saving
6.4
NOTE: In this software version, energy saving does not be supported.
License Management
6.5
The License Management menu may be used to import license files for optional features,
such as regulatory certificates of authorization to operate. When imported, the files are
stored in the eNB memory and shown in the License List area of this window.
1. In the left navigation column, select “BTS Setting > License Management” to
enter the License management page, as shown in Figure 6-4.