Configuration Guide

27
Table 5-8 DSCP Parameter Description
Parameter Description
DSCP DSCP code, which is used to differentiate the priority level.
Range from 0 to 63 integer.
Vlan Priority Vlan priority. Range from 0 to 7 integer.
4. Click “Save” to complete the DSCP setting.
On the lower of the page, you can specify DSCP value and VLAN priority for NGAP,
X2AP, F1AP, XNAP and OAM.
Configure Core Network
5.4
This version does not support the this menu.
Configure Static Route
5.5
This function is for users configure the static route.
1. In the navigation column on the left, select “Network > Static Routing” to enter
the static route configuration page, as shown in Figure 5-11.
Figure 5-11 Configure Static Route
This page displays the static route list.
2. Click to display static configuration parameters, as shown in Figure 5-12.