Configuration Guide

21
The description of VLAN configuration parameters is shown in Table 5-4.
Table 5-4 VLAN Parameter Description
Parameter Description
Name VLAN name.
ID VLAN ID
Enable Enable or disable the VLAN.
 0: Disable
 1: Enable
6. Click “Save” to complete the WAN and VLAN configuration.
Configure IPsec
5.2
The security gateway (SeGW) in the network can provide security protocol in the network
layer to ensure the safety for message transmission. If the operator has deployed the
security gateway, the gNB needs to enable the IPsec function accordingly to establish a
safe VPN channel between the gNB and the SeGW.
The gNB disables the IPsec by default.
1. Select “Network > IPsec” to enter the IPsec configuration page, as shown in
Figure 5-7.
Figure 5-7 Configure IPsec