Configuration Guide

20
Table 5-3 IPv6 Parameter Description
Parameter Description
Addressing
Type
The interface protocol used by WAN interface, include:
 DHCPv6: If DHCP is selected, no other parameter
needs to be configured.
 Static: If Static is selected, the IP address,
prefix length,
and gateway should be configured.
Port Type WAN port type. According to the network plan, specify the
usage of the port.
 Ng
 Xn
 Ng/Xn
 S1
 X2
 S1/X2
 F1
 E1
 OAM
 Other
IP When “Addressing Type” is set to “static”, the parameter
displays.
IP address of the WAN interface.
Prefix Length When “Addressing Type” is set to “static”, the parameter
displays.
The prefix length of the WAN interface.
Default
Gateway
When “Addressing Type” is set to “static”, the parameter
displays.
IP address of the default gateway.
 VLAN
Click on “WAN VLAN table” zone to display the VLAN configuration
parameters, as shown in Figure 5-6.
Figure 5-6 VLAN Configuration Parameters