Configuration Guide

19
Parameter Description
usage of the port.
 Ng
 Xn
 Ng/Xn
 S1
 X2
 S1/X2
 F1
 E1
 OAM
 Other
IP When “Addressing Type” is set to “static”, the parameter
displays.
IP address of the WAN interface.
Default
Gateway
When “Addressing Type” is set to “static”, the parameter
displays.
IP address of the default gateway.
Subnet Mask When “Addressing Type” is set to “static”, the parameter
displays.
Subnet mask address of the IP address.
 IPv6
Click on “WAN IPv6 table” zone to display the IPv6 configuration
parameters, as shown in Figure 5-5.
Figure 5-5 IPv6 Configuration Parameters
The description of IPv6 configuration parameters is shown in Table 5-3.